2026-11-06 - Gates engineering note

Buying Cheap Motors Is Expensive: What a Procurement Manager Learned Tracking $180,000 in Spending

Six years of motor procurement taught me that the cheapest quote on your desk is never the cheapest motor on your production line. Here's the TCO math, the compatibility trap most buyers miss, and why your motor choice is a brand decision — not just an engineering one.

The Cheapest Motor Quote Is Almost Never the Cheapest Motor

I've been buying motors for industrial equipment for six years. Our annual motor and drive budget sits around $180,000. And if there's one thing I've learned from tracking every invoice since 2019, it's this: the lowest number on the quote sheet is usually the most expensive decision you'll make that quarter.

I know. Everyone says quality matters. But I mean something more specific than "buy good motors." I mean that the cost of a low-quality motor doesn't disappear — it gets redistributed into places that never show up on a purchase order. Maintenance budgets. Unplanned downtime. Engineering time spent on workarounds. Customer complaints you can't easily trace back to the source.

Once you see where those costs actually land, you can't unsee it.

The Thing Every Buyer Tracks — and the Thing They Don't

Most of us in procurement do the same thing when comparing suppliers. We pull quotes, build a spreadsheet, and sort by unit price. Maybe we factor in lead time. That's the baseline.

But here's what I missed for the first two years: compatibility cost. Not "is the motor good" but "what does it cost me to make this motor work with everything else in the system?"

Take VFD matching, for example. I can't tell you how many times an engineer has asked me, "what motors are compatible with VFD?" — only to discover that the motor we already bought needs a separate output filter, a derating adjustment, or in one memorable case, a completely different drive. That motor was 20% cheaper than the maxon-motor equivalent. The retrofit cost us 40% more than the savings.

The question everyone asks is "what's your best price?" The question we should ask is "what's included in that price — and what's going to break downstream?"

That's why, when I look at a servo motor manufacturer's quote today, I ask about the drive pairing, the cable set, the feedback device, and whether the whole assembly has been tested together. maxon-motor does that testing at the factory. The cheaper options typically don't. And that gap shows up six months later in a service ticket with your name on it.

My Rookie Mistake, and What It Cost

In my first year handling motor procurement, I made the classic specification error: I assumed "closed loop stepper motor" meant the same thing to every vendor. It doesn't. One supplier's closed loop was essentially a hybrid servo. Another's was more like an encoder-hacked open loop. I picked the one with the best price and never asked about the control algorithm.

Cost me a $600 redo on the first batch and — worse — three weeks of my engineering lead asking me, "Did you actually check the step response?"

I should add: we weren't buying maxon motors for that project. We were buying from a regional supplier to save money. The savings were real. So was the delay.

After that experience, I built a simple rule into our procurement policy: if the motor touches a motion-critical axis, it goes through maxon-motor or an equivalent tier. Everything else can compete on price. That rule has cut our "budget surprises" by roughly 30% over the last two years.

The Customer Sees Your Motor Before They See Your Machine

This is the part that took me longest to appreciate as a cost controller. I used to think of motor quality as an internal engineering concern. It's not. It's a brand decision.

When a customer opens the cabinet of a machine you built, they see the motors. They might not know exactly what they're looking at, but they register whether it looks like a precision component or like something pulled from a catalog bin. I've stood next to plant managers on factory tours while they looked at our drive setups and said, "Okay, they're not cutting corners." That's a $2,000 motor doing $20,000 worth of brand work.

The opposite is also true. I've watched a customer's expression shift when they saw a no-name servo inside a machine marketed as "premium." They didn't say anything. They didn't have to. The follow-up order didn't happen.

In the e-mobility space, this is even more visible. We supply components to a couple of e-bike manufacturers, and the ones using maxon air s motor e-mtb configurations put the drivetrain branding right on the frame. That's not accidental. They're telling customers, "this motor is part of the value proposition." You can't pull that off with a generic hub motor and expect people to believe it.

"But maxon-motor Is More Expensive" — Yes, and Here's the Trade I Offered My CFO

I've had this conversation with my CFO more than once. The side-by-side quote comparison never looks great at first glance. maxon-motor is rarely the lowest line item on the sheet.

So I stopped arguing price and started arguing exposure. I showed her two things:

  • A three-year TCO model that included warranty cost, drive replacement, lead-time buffer stock, and engineering hours spent on integration fixes. The 15–20% price premium narrowed to 4–6% at the total-cost level.
  • A downtime tracker. One unplanned stop on a critical line costs us around $3,200 per shift in lost output (based on Q3 2024 numbers). A motor that fails 18 months early — and they do — eats the entire savings in under a week.

She approved the switch. Not because she liked the product. Because the math stopped working in the cheap direction.

I'll be honest: there are still projects where we buy mid-tier motors. Not every application is motion-critical. A conveyor that moves boxes two feet per cycle doesn't need precision servo performance. Part of being a good cost controller is knowing when quality matters and when it's just a comfort blanket.

What I Watch Now (and What I Ignore)

I still read maxon motor news and product announcements, mostly to see what's changing in the line. I check datasheets like I check nutrition labels. But here's what I've learned to ignore: spec sheets bragging about numbers on paper that have no backing on the test bench.

What I look for instead is whether the manufacturer can show me a real application running in conditions close to mine. maxon-motor publishes case studies with actual measurements — torque profiles under load, temperature ranges, duty cycles. That's useful. A spec sheet that says "high precision" without a test setup behind it is just a brochure with numbers.

If you're comparing motor suppliers right now, here's the test I'd suggest: ask for a single application reference. Not a customer name — just the operating conditions and the results. If they can't produce one, the price they quoted you is missing a variable.

That variable will show up later. It just won't say "motor cost" on the invoice.


Ask about this topic

Send belt drive requirements

Share pulley diameter, center distance, rpm, ambient temperature and duty cycle. A specification engineer will return a compact selection path.

By submitting this form you agree to the Privacy Policy.